Laser welding machine maintenance:

Check the laser welding machine optical components. In order to ensure that the laser laser welding machine has been in a normal working condition, continuous work or stop using for a period of time, before starting the YAG rod, dielectric diaphragm and lens protection glass and other optical components in the inspection to determine the optical components Not contaminated, if any pollution should be promptly processed to ensure that the optical components will not be damaged under strong 200mw green laser irradiation.

Check the conductivity of circulating water. The purity of the cooling water laser cooling technology introduction is the key to ensure the laser output efficiency and the life of the laser condenser chamber. The conductivity of the recycled water should be checked weekly to ensure its conductivity. The internal circulation must be changed once a month Deionized water. At any time, observe the color change of the ion exchange column in the cooling system. If it is found that the color of the resin in the column becomes dark brown or even black, replace the resin immediately.

Check and adjust the laser resonator. Equipment operators can often use black like paper to check the laser output flare, once spot uneven or energy reduction and other phenomena, the laser cavity should be promptly adjusted to ensure the quality of the laser beam output. Commissioning operator must have the common sense of powerful laser safety protection, work must wear special laser safety glasses. Laser adjustment must be carried out by specially trained personnel, otherwise it will be laser misalignment or deflection caused by other components of the optical path damage.

Laser cutting machine maintenance:

Air compressors are part of a laser cutter system. First to talk about its concept, air compressor is the main source of gas equipment, which is the original motivation (usually the motor) of the mechanical energy into gas pressure energy device, is the pressure of compressed air Occurrence of devices. Here are the main components of its maintenance and repair work.

Air filter cartridge. Under normal circumstances every 500 hours to clear the air filter element surface dust impurities, check every 2000 hours need to be replaced. Inspection or replacement cycle can be extended or shortened according to dust content. Intake valve seals. In the 500mw laser pointer cutting machine air compressor every 4000 hours of work, check the seal condition, if necessary, to be replaced. Compressor oil. Every 1000 hours to check whether enough oil, every 4,000 hours to replace the new oil.

Oil filter. Every 2000 hours to replace a new piece. Oil vapor separator. Every 4000 hours need to be replaced a new piece. Minimum pressure valve. Clean every 4000 hours, and check the opening pressure is normal. Safety valve. Every 4000 hours to check whether the action is sensitive. Drain valve. Drain moisture and dirt every 2000 hours. Transmission belt. To adjust the tightness every 2000 hours, wear inspection every 4000 hours, according to wear and tear decide whether the need to be replaced. Motor maintenance. According to the motor instruction manual for maintenance.

In order to 10mw laser pointer cutting machine air compressor can operate normally and reliably, to ensure the life of the unit, to develop a detailed maintenance plan, the implementation of manned operation, regular maintenance, regular inspection and maintenance, the air compressor to keep clean, oil-free , no dirt.